|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
M61538FP 6-Channel Electronic Volume REJ03F0103-0100Z Rev.1.0 Mar.23.2004 Description The M61538FP is 6ch electronic volume. This IC is controlled by 2-wire serial bus and is suitable for Home Audio System. Features * Electronic Volume * * * * 0 to -95dB, -/1dBstep 6-Channel independent Electronic Volume MUC I/F Controlled by serial data from microcomputer Low Noise 0.85Vrms: typ. [Volume = 0dB, Rg = 0, IHF-A] Low Distortion 0.0012%: typ. [Vi:0.3Vrms, f:1kHz, BW:400Hz to 30kHz] Power Supply Power supplies or Single power supply Applications * Receiver, AV Amp, Mini Stereo etc. Recommended Operating Condition * Supply Voltage Range Power supplies VCC: +4.5 to +7.5V [Typ: 7V], VEE: -4.5 to -7.5V[Typ: -7V], DVDD: +2.7 to + 5.5V [Typ:5V] Single power supply VCC: +9 to +12V[Typ: 10V], DVDD: 4.5 to +5.5V[Typ: 5V] System Block Diagram (Power supplies used) LIN RIN CIN SWIN SLIN SRIN LOUT ROUT COUT SWOUT SLOUT SROUT Logic CLOCK DATA DGND DVDD VCC AGND VEE Rev.1.0, Mar.23.2004, page 1 of 11 M61538FP Block Diagram and Pin Configuration LIN 13 AGND 14 RIN 15 AGND 16 CIN 17 VCC 18 MCU I/F Vol 25K Vol 12 AGND 11 LOUT 10 ROUT 9 COUT 8 DGND 7 CLOCK Logic 25K Vol 25K VEE 19 SWIN 20 AGND 21 SLIN 22 AGND 23 SRIN 24 6 DATA 5 DVDD 4 SWOUT 3 SLOUT 2 SROUT 1 AGND 25K Vol 25K Vol 25K Vol (Top View) Pin Description (Power supplies used) PIN No. 1, 23 2 3 4 5 6, 7 8 9 10 11 12, 14 13 15 16, 21 17 18 19 20 22 24 Name AGND SROUT SLOUT SWOUT DVDD DATA, CLOCK DGND COUT ROUT LOUT AGND LIN RIN AGND CIN VCC VEE SWIN SLIN SRIN Function Analog ground of SW/SL/SR volume Output pin of SR channel Output pin of SL channel Output pin of SW channel Digital Power supply (Typ: 5V) Input pin of Control data/clock Digital ground Output pin of C channel Output pin of R channel Output pin of L channel Analog ground of L/R/C volume Input pin of L channel Input pin of R channel Analog ground of all channels Input pin of C channel Positive Power supply (Typ: +7V) Negative Power supply (Typ: -7V) Input pin of SW channel Input pin of SL channel Input pin of SR channel Rev.1.0, Mar.23.2004, page 2 of 11 M61538FP Absolute Maximum Ratings Parameter Analog Power supply Digital Power supply Power dissipation Thermal derating Operating temperature Storage temperature Symbol VCC-VEE DVDD-DGND Pd K Topr Tstg Ratings 16 7 1.0 10.0 -20 to +75 -40 to +125 Unit V V W mW/C C C Condition VCC-VEE (Power supplies used) DVDD-DGND Ta 25C Ta > 25C Note: VEE DGND < DVDD VCC Thermal Deratings (Maximum Rating) 1.8 1.6 1.4 1.2 1.0 0.8 0.6 0.4 0.2 0 -40 0 40 POWER DISSIPATION pd (W) 75 80 120 150 AMBIENT TEMPERATURE Ta (C) Rev.1.0, Mar.23.2004, page 3 of 11 M61538FP Recommended Operating Conditions (Ta = 25C, unless otherwise noted) Limits Parameter Analog supply voltage (Positive) Analog supply voltage (Negative) Analog supply voltage Symbol VCC VEE VCC Min 4.5 -7.5 9 2.7 4.5 DVDD x0.7 DGND Typ 7 -7 10 5 5 -- -- Max 7.5 -4.5 12 5.5 5.5 DVDD DVDD x0.3 Units V V V V V V V Conditions Power supplies used Power supplies used Single power supply used Power supplies used, DGND = 0V Single power supply used, DGND = 0V DGND = 0V DGND = 0V Digital supply voltage VDD Logic "H" level input voltage Logic "L" level input voltage VIH VIL Notes: 1. VEE DGND < DVDD VCC 2. Apply VCC, VEE and DVDD at the same time. Relationship between Data and Clock Data signal is read at the rising edge of CLOCK. Make "H" at the timing which DATA of D0-D15 make latch. DATA D0 D1 D2 D3 D13 D14 D15 CLOCK When DATA is "H", latch signal is created at the falling edge of CLOCK. Rev.1.0, Mar.23.2004, page 4 of 11 M61538FP Clock and Data Timings (D0 ~ D15) DATA LATCH t cr 75% 25% tSLD 75% 50% 25% CLOCK tHLD tSHD tHHD tSLD tHLD tr tWHC tf tWLC Timing Definition of Digital Block Limits Parameter CLOCK cycle time CLOCK pulse width ("H" level) CLOCK pulse width ("L" level) Rising time of clock and data Falling time of clock and data DATA setup time (Rising time of clock) DATA setup time (Falling time of clock) DATA hold time ("H" level) DATA hold time ("L" level) Symbol tcr tWHC tWLC tr tf tSHD tSLD tHHD tHLD Min 8 3.2 3.2 -- -- 1.6 1.6 1.6 1.6 Typ -- -- -- -- -- -- -- -- -- Max -- -- -- 0.8 0.8 -- -- -- -- s Units Rev.1.0, Mar.23.2004, page 5 of 11 M61538FP Power on Reset This IC built-in the power on reset function. The voltage of DVDD (5 pin) -DGND (8 pin) less than 2.6V, the serial DATA can not accept. (V) DVDD(5pin) - DGND(8pin) 2.6V (S) Reset time After reset is canceled, the serial DATA can accept. Release of reset. Data Control Specification Three types of input format can be selected by changing the D14/D15 slot setting status. (Initialize all data of the 3 formats when power supply (DVDD) turn on.) (1) D0a D1a D2a D3a D4a D5a D6a D7a D8a D9a D10a D11a D12a D13a D14 D15 L Channel volume R Channel volume 0 0 (2) D0b D1b D2b D3b D4b D5b D6b D7b D8b D9b D10b D11b D12b D13b D14 D15 C Channel volume SW Channel volume 0 1 (3) D0c D1c D2c D3c D4c D5c D6c D7c D8c D9c D10c D11c D12c D13c D14 D15 SL Channel volume SR Channel volume 1 0 (4) D0c D1c D2c D3c D4c D5c D6c D7c D8c D9c D10c D11c D12c D13c D14 D15 Test Mode 1 1 Rev.1.0, Mar.23.2004, page 6 of 11 M61538FP Setting Code L/R/C/SW/SL/SR Channel Volume L R C SW SL SR 0dB -1dB -2dB -3dB -4dB -5dB -6dB -7dB -8dB -9dB -10dB -11dB -12dB -13dB -14dB -15dB -16dB -17dB -18dB -19dB -20dB -21dB -22dB -23dB -24dB -25dB -26dB -27dB -28dB -29dB -30dB -31dB -32dB -33dB -34dB -35dB -36dB -37dB -38dB -39dB -40dB -41dB -42dB -43dB -44dB -45dB -46dB -47dB D0a D7a D0b D7b D0c D7c 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 D1a D8a D1b D8b D1c D8c 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 D2a D9a D2b D9b D2c D9c 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 D3a D10a D3b D10b D3c D10c 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 D4a D11a D4b D11b D4c D11c 0 0 0 0 1 1 1 1 0 0 0 0 1 1 1 1 0 0 0 0 1 1 1 1 0 0 0 0 1 1 1 1 0 0 0 0 1 1 1 1 0 0 0 0 1 1 1 1 D5a D12a D5b D12b D5c D12c 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 D6a D13a D6b D13b D6c D13c 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 L R C SW SL SR -48dB -49dB -50dB -51dB -52dB -53dB -54dB -55dB -56dB -57dB -58dB -59dB -60dB -61dB -62dB -63dB -64dB -65dB -66dB -67dB -68dB -69dB -70dB -71dB -72dB -73dB -74dB -75dB -76dB -77dB -78dB -79dB -80dB -81dB -82dB -83dB -84dB -85dB -86dB -87dB -88dB -89dB -90dB -91dB -92dB -93dB -94dB -95dB dB D0a D7a D0b D7b D0c D7c 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 It's initial setting when DVDD turn on. D1a D8a D1b D8b D1c D8c 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 D2a D9a D2b D9b D2c D9c 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1/0 D3a D10a D3b D10b D3c D10c 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1/0 D4a D11a D4b D11b D4c D11c 0 0 0 0 1 1 1 1 0 0 0 0 1 1 1 1 0 0 0 0 1 1 1 1 0 0 0 0 1 1 1 1 0 0 0 0 1 1 1 1 0 0 0 0 1 1 1 1 1/0 D5a D12a D5b D12b D5c D12c 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 1/0 D6a D13a D6b D13b D6c D13c 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 1/0 Rev.1.0, Mar.23.2004, page 7 of 11 M61538FP Electrical Characteristics (Supply current) (Unless otherwise noted, Ta = 25C, VCC(18pin) = 7V, VEE(19pin) = -7V, DVDD(5pin) = 5V, RL = 10k) Limits Parameter Positive Supply current Negative Supply current Digital Supply current Symbol ICC IEE IDD Min -- -20 -- Typ 11 -11 0.5 Max 20 -- 2 Units mA mA mA Test Condition when no signal is provided when no signal is provided when no signal is provided Electrical Characteristics (Input/Output) (Unless otherwise noted, Ta = 25C, VCC(18pin) = 7V, VEE(19pin) = -7V, DVDD(5pin) = 5V, f = 1kHz, RL = 10k) Limits Parameter Input resistance Maximum output voltage Pass gain Distortion Output noise voltage Maximum attenuation Volume gain between channels Cross talk between channels Symbol Rin VOM Gv THD Vno ATTmax Dvol CT Min 17 4.0 -2 -- -- -- -1 -- Typ 25 4.5 0 0.0012 0.85 -120 0 -110 Max 33 -- 2 0.009 8 -70 1 -70 Units k Vrms dB % Vrms dB dB dB Test Condition 13, 15, 17, 20, 22, 24pin, Volume = 0 to -dB 2, 3, 4, 9, 10, 11pin output, RL = 10k, THD = 1% 13, 15, 17, 20, 22, 24pin input, 2, 3, 4, 9, 10, 11pin output BW = 400Hz to 30kHz, Vi = 0.3Vrms, RL=10k Volume = 0dB , Rg = 0 , IHF-A Vi = 2Vrms, Volume = -dB, IHF-A Volume = 0, IHF-A Vi = 2Vrms, RL = 10k, IHF-A, Rg = 0 Rev.1.0, Mar.23.2004, page 8 of 11 M61538FP Application Example 1 (Power supplies used) LIN 1 13 14 RIN 1 25K Vol 12 10 L 11 10 9 Vol 10k 10 R 15 16 CIN VCC 7V 0.1 100 18 1 25K Vol 10k 10 10k C 17 25K 8 CLOCK 7 MCU I/F Logic MCU 0.1 100 19 20 6 DATA VDD 5V 0.1 10 100 VEE -7V 1 25K Vol 5 4 SWIN SW 21 22 SLIN 1 10k 10 25K Vol SL 10k 3 10 SR 10k 23 24 SRIN 1 2 1 25K Vol Units Resistance : Capacitance:F Rev.1.0, Mar.23.2004, page 9 of 11 M61538FP Application Example 2 (Single power supply used) LIN 1 13 14 RIN 1 25K Vol 12 10k L 11 10 10 10k R 15 16 CIN VREF 5V VCC 10V 0.1 100 1 25K Vol 10 10k C 9 10 Vol 17 18 25K 8 CLOCK 7 MCU I/F Logic MCU 0.1 19 100 6 DATA VDD 5V 0.1 10 100 20 SWIN 1 25K Vol 5 4 SW 21 22 SLIN 1 10k 10 25K Vol SL 3 10k 10 SR 23 24 SRIN 1 2 10k 25K Vol 1 Units Resistance : Capacitance:F Rev.1.0, Mar.23.2004, page 10 of 11 M61538FP 24P2Q-A JEDEC Code -- e b2 13 MMP Weight(g) 0.2 Lead Material Cu Alloy Plastic 24pin 300mil SSOP EIAJ Package Code SSOP24-P-300-0.80 24 Package Dimensions HE E L1 L Rev.1.0, Mar.23.2004, page 11 of 11 F Recommended Mount Pad Symbol 1 12 A D G A2 b A1 e y c z Detail G Detail F Z1 e1 A A1 A2 b c D E e HE L L1 z Z1 y b2 e1 I2 Dimension in Millimeters Min Nom Max -- -- 2.1 0 0.1 0.2 -- 1.8 -- 0.3 0.35 0.45 0.18 0.2 0.25 10.0 10.1 10.2 5.2 5.3 5.4 -- 0.8 -- 7.5 7.8 8.1 0.4 0.6 0.8 -- 1.25 -- -- 0.65 -- -- 0.8 -- -- -- 0.1 0 -- 8 -- 0.5 -- -- 7.62 -- -- 1.27 -- I2 Sales Strategic Planning Div. Keep safety first in your circuit designs! Nippon Bldg., 2-6-2, Ohte-machi, Chiyoda-ku, Tokyo 100-0004, Japan 1. Renesas Technology Corp. puts the maximum effort into making semiconductor products better and more reliable, but there is always the possibility that trouble may occur with them. Trouble with semiconductors may lead to personal injury, fire or property damage. Remember to give due consideration to safety when making your circuit designs, with appropriate measures such as (i) placement of substitutive, auxiliary circuits, (ii) use of nonflammable material or (iii) prevention against any malfunction or mishap. Notes regarding these materials 1. These materials are intended as a reference to assist our customers in the selection of the Renesas Technology Corp. product best suited to the customer's application; they do not convey any license under any intellectual property rights, or any other rights, belonging to Renesas Technology Corp. or a third party. 2. Renesas Technology Corp. assumes no responsibility for any damage, or infringement of any third-party's rights, originating in the use of any product data, diagrams, charts, programs, algorithms, or circuit application examples contained in these materials. 3. All information contained in these materials, including product data, diagrams, charts, programs and algorithms represents information on products at the time of publication of these materials, and are subject to change by Renesas Technology Corp. without notice due to product improvements or other reasons. It is therefore recommended that customers contact Renesas Technology Corp. or an authorized Renesas Technology Corp. product distributor for the latest product information before purchasing a product listed herein. The information described here may contain technical inaccuracies or typographical errors. Renesas Technology Corp. assumes no responsibility for any damage, liability, or other loss rising from these inaccuracies or errors. Please also pay attention to information published by Renesas Technology Corp. by various means, including the Renesas Technology Corp. Semiconductor home page (http://www.renesas.com). 4. When using any or all of the information contained in these materials, including product data, diagrams, charts, programs, and algorithms, please be sure to evaluate all information as a total system before making a final decision on the applicability of the information and products. Renesas Technology Corp. assumes no responsibility for any damage, liability or other loss resulting from the information contained herein. 5. Renesas Technology Corp. semiconductors are not designed or manufactured for use in a device or system that is used under circumstances in which human life is potentially at stake. Please contact Renesas Technology Corp. or an authorized Renesas Technology Corp. product distributor when considering the use of a product contained herein for any specific purposes, such as apparatus or systems for transportation, vehicular, medical, aerospace, nuclear, or undersea repeater use. 6. The prior written approval of Renesas Technology Corp. is necessary to reprint or reproduce in whole or in part these materials. 7. If these products or technologies are subject to the Japanese export control restrictions, they must be exported under a license from the Japanese government and cannot be imported into a country other than the approved destination. Any diversion or reexport contrary to the export control laws and regulations of Japan and/or the country of destination is prohibited. 8. Please contact Renesas Technology Corp. for further details on these materials or the products contained therein. RENESAS SALES OFFICES Renesas Technology America, Inc. 450 Holger Way, San Jose, CA 95134-1368, U.S.A Tel: <1> (408) 382-7500 Fax: <1> (408) 382-7501 Renesas Technology Europe Limited. Dukes Meadow, Millboard Road, Bourne End, Buckinghamshire, SL8 5FH, United Kingdom Tel: <44> (1628) 585 100, Fax: <44> (1628) 585 900 Renesas Technology Europe GmbH Dornacher Str. 3, D-85622 Feldkirchen, Germany Tel: <49> (89) 380 70 0, Fax: <49> (89) 929 30 11 Renesas Technology Hong Kong Ltd. 7/F., North Tower, World Finance Centre, Harbour City, Canton Road, Hong Kong Tel: <852> 2265-6688, Fax: <852> 2375-6836 Renesas Technology Taiwan Co., Ltd. FL 10, #99, Fu-Hsing N. Rd., Taipei, Taiwan Tel: <886> (2) 2715-2888, Fax: <886> (2) 2713-2999 Renesas Technology (Shanghai) Co., Ltd. 26/F., Ruijin Building, No.205 Maoming Road (S), Shanghai 200020, China Tel: <86> (21) 6472-1001, Fax: <86> (21) 6415-2952 Renesas Technology Singapore Pte. Ltd. 1, Harbour Front Avenue, #06-10, Keppel Bay Tower, Singapore 098632 Tel: <65> 6213-0200, Fax: <65> 6278-8001 http://www.renesas.com (c) 2004. Renesas Technology Corp., All rights reserved. Printed in Japan. Colophon .1.0 |
Price & Availability of M61538FP |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |